How to Strengthen the WiFi signal in the White House, according OBAMA

WiFi wireless connection quality is poor many users complained both at home and office. This problem can make all the activities are restricted, especially when the Internet has become part of everyday life.

WiFi signal problems that are "breaking disconnected" was also experienced the number one in the United States. US President Barrack Obama was also involved complained WiFi internet connections in offices and homes.

"It (the White House) ancient buildings, so many dead spots where Wi-Fi is often incoherent," Obama said

Obama's wife also mengamininya by nodding when Obama says so. Not to forget their two daughters, Malia and Natasha were also claims often made annoyed with the WiFi condition.

WiFi signal problems "slow" experienced Obama family is actually easy to overcome. The first step that must be done is to check the router being used. Because, starting from a position to the router settings will affect whether or not a strong WiFi signal.
When checking the router make sure to try these 10 simple steps:

1. Check the position of the router

Checking the router positions seem trivial, but the effect could be significant. Routers work sends a signal to all directions. Therefore, you should put the router in the center of the room.

When the router is placed next to a window, then no signal is sent to the outside. This would make WiFi as futile and does not reach all parts of the room.

2. Do not put on the floor

Place the router in a high place, such as a table or dresser. A higher position will benefit because the router is designed to send a signal to the bottom. In addition, the floor contains cement, concrete, and metals are difficult to be penetrated by a WiFi signal.

3. Place the router in the best place

WiFi signal would be reflected more strongly in the store room where the router. On that basis, we recommend putting the router in a room that is often used when using the internet.

4. Select the open

There are many materials that can absorb the router's signal and reduce its performance. To maintain optimum signal performance, you should not put a router in between the large-sized furniture and walls, or in the closet. Choose the crush-free position and make the router can be seen from anywhere.

5. Keep away from other electronic

Keep the router from other electronic devices, such as microwaves, cordless phones, and TVs. Any device that generates an electromagnetic signal could disrupt and weaken the performance of the WiFi signal.

6. Adjust the antenna to stand

Remember to set your router's antenna is in the vertical position. This position will make the signal emitted horizontally so that the WiFi signal is easier to reach all parts of the room.

7. Check the signal strength
There are a number of applications, such as Cloudcheck or Amped that can be used for this purpose. When checking the signal, can be mapped which part is receiving a strong signal and which is receiving a weak signal.

8. Set the software router
WiFi connection speed can also be done by entering certain settings in the software router. Access to this software can be opened via a dedicated IP, usually 192.168.1.1.

Upon entry into the settings menu, change the router's channel frequency. Usually there are 14 channels that can be selected. It is generally best Channel 1, 6, and 11. The channel tend to be minimal disruption because rarely intersect with the channel used by another person.

In addition to setting the channel, check for firmware updates. Usually the router makers will issue a firmware update to improve the performance of the device.

9. Do a speed test

Do a speed test to find out where the WiFi connection problems. First try to do it with a WiFi connection, and then do the same thing using a wired connection. If both are equally bad, the problem is on the Internet service provider used.

10. Buy a new router

It is a last resort. When all have been tried and had to make sure the problem does not come from an internet service provider, buy a new router.

source: http://tekno.kompas.com/.